Description
Control panel
The VERSA IP control panel is designed for protection of small and medium-sized premises. It allows you to create a wired or wireless system, as well as a hybrid one, which combines both these kinds of system. It is compatible with ACU-120 and ACU-270 controllers, which offer an excellent operating range for the ABAX, ABAX 2 family devices – even up to 500 m in the open.
The VERSA IP is the only solution that combines features that were previously only available by using several separate devices. ETHM, INT-VG and INT-AVmodules as well PSTN dialer are integrated on its mainboard. As a result, the VERSA IP control panel enables communication via two channels: Ethernet and PSTN, thus ensuring effective transfer of information.
- EN50131 Grade 2 compliance
- 4 programmable wired zones:
- support for NO and NC type detectors, and roller shutter and vibration detectors
- support for EOL and 2EOL configuration
- additional tamper input, NC type
- 5 programmable wired outputs:
- 2 high-current outputs
- 2 high-current outputs, OC type
- 1 relay output
- 3 power outputs
- output for connecting dedicated enclosure-mounted piezoelectric transducer (acoustic signaling)
- maximum number of programmable zones: 30
- maximum number of programmable outputs: 12
- system subdivision into 2 partitions:
- each zone can be assigned to two partitions
- system control by means of:
- LCD or LED keypads
- VERSA-LCDM-WRL, VERSA-KWRL2 wireless keypads
- INT-TSG, INT-TSH touchscreen keypads
- proximity cards
- remote control keyfobs
- integrated PSTN module to enable:
- reporting (SIA, ContactID, etc.)
- voice messaging (8 numbers, 16 messages)
- remote programming (300 bps modem) with DLOADX program
- built-in ETHM module to enable:
- e-mail messaging
- control by means of VERSA CONTROL application offering PUSH notifications
- reporting to monitoring station
- programming with DLOADX program
- built-in voice module:
- nearly 13 minutes for messages to be used in voice menu
- over 4 minutes for 16 telephone notification messages (with message duration up to 16 seconds)
- built-in USB-HID socket
- memory of 2047 events
- capability to handle 30 users and assign to each of them:
- code
- proximity card
- keyfob
- 4 timers to enable automatic:
- arming/disarming partitions
- control of outputs (turning light ON/OFF, watering garden, etc.)
- plug-in terminal blocks
- option of not reporting possible problems with connecting to the SATEL server as a failure.
Voice messages 16
Low current programmable outputs rating 50 / 12 VDC mA
Event log 2047
Partitions 2
Timers 4
Power supply rating 2 A
Enclosure dimensions 266 x 286 x 100 mm
Board dimensions 173 x 105 mm
Operating temperature range -10…+55 °C
Supply voltage (±15%) 18 V AC, 50-60 Hz
Maximum humidity 93±3%
Current consumption from 230 V mains – standby 120 mA
Current consumption from battery – standby 160 mA
Battery failure voltage threshold (±10%) 11 V
Battery cut-off voltage (±10%) 10,5 V
Environmental class according to EN50130-5 II
Maximum current consumption from the 230V network 160 mA
Maximum current consumption from the battery 200 mA
Programmable wired inputs 4
Maximum number of programmable inputs 30
Programmable wired outputs 5
Maximum number of programmable outputs 12
Supplying outputs 3
Communication buses 1
Manipulators up to 6
Security grade according to EN 50131 Grade 2
Current-carrying capacity, AUX output 500 / 12 V DC
Recommended transformer 40 VA
Mass (incl. enclosure and accessories) 1220 g
Users 30
Notification e-mail addresses 8
Text messages 64
Current-carrying capacity of +VR output 200 / 12 V DC
Current-carrying capacity of KPD output 500 / 12 V DC
Current-carrying capacity of programmable relay output 1000 / 24 V DC mA
Current-carrying capacity of programmable high-current outputs 1100 / 12 VDC mA
Output voltage range 10,5 V…14 V DC
Battery charging current 800 mA
Power supply output voltage 12 V DC ±15%
Telephone numbers for notification 8
