UNIVERSAL COMMUNICATION MODULE GSM-X

GSM-X is a multi-purpose communication module that offers extensive functionality and support for multiple communication paths.

It can easily find numerous applications, some of which can be implemented in parallel.

GSM-X najwaÅ¼niejsze funkcje

Full flexibility

The module is capable of monitoring any alarm or home automation system. It can be successfully used in many existing, as well as newly built systems. When working in conjunction with the alarm control panel, it can receive information about events, thus simulating the monitoring station. When used with simpler models of control panels or when supervising technological lines etc., it will track changes in the status of its inputs. The information received is transmitted by the module to monitoring stations of security agencies and/or to any parties concerned.

The module can be used to implement remote control functions, such as arming the system or opening the gate, also using the mobile application.

GSM-X can give a “new life” to some older alarm systems.

Compatibility with INTEGRA and INTEGRA Plus
alarm control panels

GSM-X can interact with the INTEGRA and INTEGRA Plus control panels via the RS-232 interface. It can report events from these control panels through all available paths: audio, SMS, Ethernet* and GPRS. For INTEGRA Plus, a function of automatic creation of SMS notifications is also available, the message content being based directly on the event list.

Additionally, GSM-X allows remote connection to the INTEGRA and INTEGRA Plus programs:

DLOADX – which is used for configuration, and
GUARDX – which is used for supervision and administration of alarm systems.

*When GSM-X is used with GSM-X-ETH

Communication

The device comes with a GSM telephone. It has two SIM card slots and allows you to use services provided by different operators. If one of the cards causes any communication problems, the module automatically switches to the other card to maintain continuous communication. A very useful feature is the prepaid SIM card handling functions that allow you to check your account balance and set notifications in case it has dropped below the required minimum.

An undisputable advantage of the device is that it allows simple expansion by adding the
GSM-X-ETH Ethernet module and thus provides access to another communication channel i.e.
– Ethernet network.

GSM-X GSM-X effective reporting - scheme

Effective reporting

As regards reporting, information can be effectively transmitted using:

GPRS – via TCP or UDP protocol
voice – audio path via GSM
text – SMS messages
Ethernet* – via TCP or UDP

Where events are made available using GPRS technology or via Ethernet*, the module supports two transmission formats:

SIA-IP (for communication with any monitoring station)
SATEL (for communication with SATEL made devices: STAM-2 monitoring station or SMET-256 reporting converter).

Support for several transmission paths in one device guarantees fast and reliable transfer of information. You can use each of them independently, defining specific tasks to be carried out.

Dual Path Reporting

GSM-X Dual Path Reporting - scheme

GSM-X with the GSM-X-ETH module connected makes possible reporting through two independent paths: Ethernet and GPRS (with priority setting option).
The device is constantly monitoring the status of connections with the monitoring station and, when necessary, it replaces one channel with the other.

GSM-X offers the possibility of reporting to two autonomous monitoring stations, each of which, if necessary, may have two IP addresses.

GSM-X Notification messaging - scheme

Notification messaging

Модуль GSM-X может отправлять уведомления на 8 телефонных номеров:

голосовые сообщения (интегрированный модуль голосовых сообщений)
SMS
PUSH
CLIP.

The device can transmit notifications to the recipient through several independent paths. The event alert will be sent via all of the preprogrammed channels, therefore the information will reach the recipient even when one of them turns out to be unavailable.

GSM gateway

The module can fully replace the analog line. In that case, it generates voltage states and line status signals (e.g. on-hook/off-hook) typical of the line and, after connection via GSM network is set up, it transmits signals coming from the analog line. When the line is unavailable, it diverts the voice calls to the GSM network. In the case of private branch exchanges (PBX), it functions as an additional external line, which allows you to optimize the cost of calls (from PSTN to GSM). The module can also filter calls, generate a ringing tone and caller ID information.

GSM-X Remote control - scheme

Remote control

GSM-X has 4 outputs that can be remotely controlled and activated in several ways:

In addition to controlling the alarm system, the GSM-X module will be a perfect choice to implement automation functions, including control of lighting, gates, wickets, roller shutters/blinds, solenoid valves, etc. If needed, it will turn on heating, air conditioning, smoke extraction, watering and many other systems.

GSM-X Mobile access

Mobile access

The application GX CONTROL allows:

verification of the status of inputs and outputs (connected devices)
viewing troubles with the possibility of clearing their memory
viewing event memory with the possibility of filtering
remote control of module outputs (devices connected to them).

PUSH messages give the user permanent access to information.

Importantly, configuration of the application is very simple, and so is connection with the module. All you have to do is send an SMS from the application level to the device and receive the configuration data in response. Another, equally convenient way is to scan the QR code that is generated in the GX Soft program or in a preconfigured application

Functional software

GX Soft is an advanced tool provided with a friendly and clear interface, intended for configuration as well as diagnostics of SATEL communication modules.

The module and the program interact locally (via USB) or remotely (via Ethernet* or GPRS.

Easy and secure connection

Thanks to the SATEL connection set-up service, you can enjoy many functionalities of GX CONTROL and GX Soft. Configuration of communication between the application / program and the GSM-X module takes just a few moments, without any need to use external IP address or advanced network settings. When being sent, the data are encrypted using a sophisticated algorithm to ensure security of the transmission.

Remote software update

GSM-X is compatible with the UpServ program, which enables the device to be remotely updated. This allows the installer to quickly add new functionalities without having to physically visit the premises and dismount the module.